Related Information
& “Checking the Network Connection Status” on page 25
Making Wi-Fi Direct Simple AP Settings
is method allows you to connect the printer directly to computer or smart devices without an access point. e
printer acts as an access point.
c
Important:
When you connect from a computer or smart device to the printer using the Wi-Fi Direct (Simple AP) connection,
the printer is connected to the same Wi-Fi network (SSID) as the computer or smart device and the communication
is established between them. Since the computer or smart device is automatically connected to the other connectable
Wi-Fi network if the printer is turned o, it is not connected to the previous Wi-Fi network again if the printer is
turned on. Connect to the printer's SSID for Wi-Fi Direct (Simple AP) connection from the computer or smart
device again. If you do not want to connect every time you turn the printer on or o, we recommend using Wi-Fi
network by connecting the printer to an access point.
1. Select Wi - Fi s e t u p on the home screen, and then press the OK button.
2. Select Wi - Fi D i r e c t , and then press the OK button.
3. Press the OK button.
4.
Press the OK button to start the setup.
Note:
❏ is step is skipped when the device has already been connected over a Wi-Fi Direct (Simple AP) connection.
❏ If this is the rst time the device has been connected, you can change the password for the Wi-Fi Direct (Simple AP)
connection. Press the
d
button and follow the on-screen instructions. If you want to change the password aer
connecting the device, disconnect it and then setup the password again.
5. Press the
d
button to show the SSID and password.
6.
Check the SSID and password displayed on the printer's control panel. On the network connection screen of
the computer or smart device, select the SSID shown on the printer's control panel to connect.
7.
Enter the password displayed on the printer's control panel on the computer or smart device.
8. Aer the connection is established, press the OK button on the printer's control panel.
9. Press the
button.
Related Information
& “Checking the Network Connection Status” on page 25
Making Advanced Network Setting
You can change the network device name, TCP/IP setup, DNS server and so on. Check your network environment
before making changes.
User's Guide
Network Settings
23
To Next Page
Loading...
Need help?
General
