Epson PM-520 series

3. Pull out the battery.
4. Close the battery cover.
Battery Charging Precautions
❏
e
battery slowly runs down even when you do not use the printer. Charge the battery before you run the
printer on the battery.
❏ We recommend turning o the printer when not in use to save the battery. You can also set to turn o the
printer automatically.
❏ e battery's usable time is shorter in low temperature environments, even if you have charged the battery fully.
❏ You do not need to use the battery completely before charging it.
❏ e battery may be hot right aer it is charged or used; this is normal.
❏ Charge the battery within a range of 3 to 50°C (37.4 to 122°F). e battery may not be fully charged or the
battery may deteriorate if you charge it in low or high temperatures.
❏ Charging only takes place if the printer is idle, in sleep mode, or turned
o.
❏ If the battery's usable time is signicantly short even aer the battery is fully charged, the battery may be at the
end of its service life. We recommend replacing the battery with a new one.
❏ If you do not use the printer for a long time, charge the battery on a regular basis to avoid letting it run out. If
the printer does not turn on, charge the battery for more than 30 minutes, and then turn on the printer again.
❏ Charge the battery before using it if it has not been used for a long period. If the battery charging light does not
turn on, charge the battery for more than 30 minutes. If the light remains o, contact Epson support.
User's Guide
Using the Optional Battery
68