135
7
Managing Projectors
The software included with your projector lets you monitor and
control your projectors from a remote computer:
■ Use EMP Monitor (available for Windows only) to see your
projectors’ status, switch image sources, and control basic settings.
■ Use the mail notification function to receive e-mail alerts about
possible problems.
You can also use NS Connection to register up to 16 projectors as a
group. This allows you to provide quick and easy access to these
projectors from other computers.
To use the software to manage your projectors, first install EMP
Monitor as described on page 182. If you plan to create projector
groups, also install EMP NS Connection. Then connect and
configure each projector you want to monitor. You can connect the
projector wirelessly in Access Point mode (see page 65) or over a wired
network as described here.
This chapter covers the following information:
■ Connecting your projector to a wired network
■ Monitoring and controlling your projector with EMP Monitor
■ Using e-mail alerts to warn you of problems
■ Using a browser to monitor the projector
To Next Page
Loading...
Need help?
General