Presenting Through a Wireless Network 81
You see the following screen:
4. Press
Enter to show the menu, then choose EAP-TLS and press
Enter.
The certificate information appears on the screen.
5. When you’re done making these settings, select
Return, select
Setup complete, and then select Yes to confirm that you want
to save the changes. Press
Menu to exit the menu system.
Projecting Over a Network
Once you’ve started EasyMP and set up your projector and computer
in either Ad Hoc (Quick) mode or Access Point (Advanced) mode, or
in the optional wired LAN mode, as described on page 136, follow
these steps to start NS Connection and project over the network.
1. Make sure you’ve set up your projector (see page 56).
2. Windows: Select
EMP NS Connection from the Start menu.
Mac OS X: Double-click the
EMP NS Connection icon in your
Applications folder.
To Next Page
Loading...
