182 Software Installation
Mac System Requirements
Before you install the software, make sure your Mac meets the
following requirements:
■ Mac OS X 10.3 or later (OS X 10.3.9 to 10.4.5 recommended)
■ AirPort (802.11b) or AirPort Extreme (802.11g) wireless network
interface to use EMP NS Connection wirelessly
■ Power Macintosh
®
series G3 900 MHz or more, iMac,
®
PowerBook,
®
or iBook
®
■ At least 256MB of RAM
■ At least 128MB of free hard disk space
■ XGA (1024 × 768) or better display adapter and monitor, 16-bit
color or higher
Installing the Software on a Windows
System
Follow these steps:
1. Insert the EasyMP CD-ROM in your computer’s CD-ROM or
DVD drive.
2. Click
Custom, then make sure EMP Monitor is selected (along
with the other two options).
note
You can present over a
wireless network from
Mac OS X using EMP NS
Connection. However,
EMP SlideMaker and
EMP Monitor are available
only for Windows.
To Next Page
Loading...
