52 Connecting to Computers, Cameras, and Other Equipment
Inserting the Wireless 802.11g/b/a
Module
To use the projector over a wireless network, you need to install the
projector’s wireless LAN module (included). Once the module is
installed, see page 55 to configure the projector and your network.
1. Insert the wireless LAN module that came with your projector.
2. Turn the projector over and insert the included screw to secure
the module and keep it from being easily removed.
caution
Use only the Epson
802.11g/b/a wireless module
in the projector.
caution
Never remove the module
while its indicator light is
green or when projecting
wirelessly. You may damage
the module or lose data.
To Next Page
Loading...
Need help?
General