Epson PowerLite 1815p - Configuring the Monitoring Interval; Using E-Mail Alerts

Managing Projectors 147
Configuring the Monitoring Interval
If you need to have the most current status information about your
projectors, click the
Refresh button in EMP Monitor.
To select how often EMP Monitor checks the status of projectors,
follow the steps below:
1. From the Tool menu, select
Environment Setup. You see this
screen.
2. Enter the desired Update interval and click
OK.
Using E-mail Alerts
You can set up e-mail alerts to warn you of problems with the
projector. Follow the steps below:
1. Open EMP Monitor.
2. From the Tool menu, select
Mail notification function.
note
If you want EMP Monitor
to run whenever you start
your computer, click
Register at startup.
note
You can also set e-mail alerts
from the projector’s menu
system (see page 137).