Presenting Through a Wireless Network 75
10. Click the AirPort icon on the menu bar at the top of the
Macintosh desktop. You see the AirPort status menu:
11. Check to make sure AirPort is turned on.
12. Select the name of your AirPort network.
Using Wireless Security Options
You can use the following security options when connecting to the
projector wirelessly: WEP encryption, WPA security, EAP-TLS
certificate validation, or LEAP, EAP, or PEAP authentication. To set
these security features up on your wireless network, see your
documentation or get help from your network administrator. See the
following sections to enable the security option on your projector:
■ “Enabling WEP Encryption” below
■ “Enabling WPA Security” on page 77
■ “Enabling EAP, LEAP, or PEAP Authentication” on page 79
■ “Enabling EAP-TLS Certificate Validation” on page 80
Enabling WEP Encryption
1. Press Menu on the projector remote. Highlight Network and
then press
Enter.
2. Choose
Network Configuration and press Enter.
3. Highlight
Security, then press Enter.
To Next Page
Loading...
Need help?
General