156 Maintaining the Projector
Replacing the Lamp and Air Filter
The life span of the projection lamp is about 2500 hours if
Brightness Control in the Settings menu is set to High (default), and
3000 hours if
Brightness Control is set to Low. See page 159 to
check the lamp usage.
It is time to replace the lamp when:
■ The projected image gets darker or starts to deteriorate.
■ The message Replace the lamp appears on the screen when the
lamp comes on and the lamp warning light flashes orange. To
maintain projector brightness and image quality, replace the lamp
as soon as possible.
■ The lamp warning light flashes red (the lamp is burnt out).
Contact your dealer or call Epson at 800-GO-EPSON
(800-463-7766). Request part number V13H010L40.
note
When you get a replacement
lamp for your projector, you
should replace the filter.
Turn off this product when
not in use to prolong the life
of the projector.
Lamp warning light
To Next Page
Loading...
Need help?
General