28 Setting Up the Projector
Connecting an S-Video Source
If your video source has an S-Video jack, you can use it to project a
higher quality video image than composite video. You’ll need an
S-Video cable, which is usually provided with your video source, or
you can purchase one from Epson (part number ELPSV01). See
page 13 for ordering information.
Before starting, make sure the projector and your DVD player or
other video source are turned off.
1. Insert one end of the S-Video cable into the projector’s
S-Video
port and the other end into the S-Video output port of your video
source.
2. To play sound through the projector, follow the instructions
beginning on page 31.
If you don’t need to make any other connections, you can plug in
your projector and turn it on. See page 36 for instructions.
If more than one device is connected to the projector, select the
correct source after projection starts by pressing the
Source Search
button on the projector or remote control. See page 38.
note
Component video provides
the highest quality video
image. See page 30 for
details.
S-Video port
To Next Page
Loading...
Need help?
General