60 Fine-tuning the Projector
■ Video Signal (composite and S-Video)
Leave this setting at
Auto unless you are using a 60-Hz PAL
system (select
PAL60).
■ Aspect
Sets the image’s aspect ratio (ratio of width to height). Select
Auto, Normal, 16:9, Full, Zoom, or Through; see page 49
for details.
4. When you’re finished, press
Esc or Menu.
Customizing Projector Features
The Settings menu lets you customize the way you use the projector,
from adjusting lamp brightness and speaker volume to applying
security controls.
1. Press the
Menu button.
2. Select the
Settings menu.
3. Press
Enter. Then use the up and down arrow buttons and the
Enter button to set the following options:
■ Keystone
Adjusts a distorted image from a trapezoid shape to
rectangular.
■ Zoom
Adjusts the image size from Wide (larger) to Tele (smaller).
To Next Page
Loading...
Need help?
General