26 Setting Up the Projector
Connecting to Video Sources
You can connect a DVD player, VCR, camcorder, digital camera,
gaming console, or any other compatible video source to your
projector. You can connect up to four video devices at one time.
The projector supports HDTV, SDTV, NTSC, PAL, and SECAM,
and automatically detects the video format. It can receive composite
video, S-Video, RGB video, and component video. The type of cable
you need depends on the video source:
■ For composite video, use a commercially available RCA A/V
cable. See page 27.
■ For S-Video, use the S-Video cable supplied with your video
device or order one from Epson. See page 28.
■ For RGB video, use the VGA computer cable included with the
projector. See page 29.
■ For component video, you’ll need the optional Epson
component-to-VGA video cable. See page 30.
After connecting your video device to the projector, you may want to
connect an audio cable to play sound from your video equipment
through the projector’s built-in speaker or external speakers. See
page 31 for instructions.
note
The projector does not
support TV antenna cable
F connectors.
To Next Page
Loading...
Need help?
General