54 Fine-tuning the Projector
Using the Projector’s Menu System
The projector menus let you adjust and customize the projector
features:
■ The Image menu lets you modify the colors of the projected
image and fine-tune brightness, contrast, and sharpness. See
page 56.
■ The Signal menu lets you make adjustments to the input signal.
You can select your input source, change the image position and
aspect ratio, and adjust tracking and sync for computer images.
See page 58.
■ The Settings menu lets you customize the way you use the
projector. It allows you to adjust the volume and keystone
correction, set lamp brightness to high or low, control use of the
remote control receivers, project a test pattern for adjustments,
and disable buttons on the projector while you are projecting. See
page 60.
■ The Extended menu lets you customize the way you set up the
projector. Among the options, you can select the menu language,
set rear or ceiling projection, and turn on
Sleep Mode, High
Altitude Mode
, and other projector features. See page 62 and
page 66.
■ The Network menu lets you select your network settings and
optional passwords for monitoring the projector over a network
or over the web. See page 64.
■ The Info menu provides information about lamp status, and
computer or video settings. See page 64.
■ The Reset menu lets you restore the projector’s factory default
settings. See page 72.
To Next Page
Loading...
Need help?
General