40 Projecting
Adjusting the Image
Once you see your image, you’ll need to make certain adjustments:
■ To focus or zoom your image, see below.
■ If the image is too high or too low, you can reposition it.
See page 41.
■ If the image isn’t square, see page 42.
■ To adjust image brightness, see page 42.
■ If a computer image displays incorrectly, see page 43.
You can make many other adjustments to the image—such as
changing the brightness, contrast, and aspect ratio—using the
projector’s menu system. See Chapter 4 for more information.
Focusing and Zooming Your Image
Rotate the focus ring to sharpen the image.
Press the
Wide button on the projector to enlarge the image, or the
Tele button to reduce it.
Focus
ring
Wide
button
Tele
button
To Next Page
Loading...
Need help?
General