Fine-tuning the Projector 71
Disabling the Projector’s Buttons
You can use the Control Panel Lock function to disable all the
projector’s buttons, or all the buttons except for the P
Power button.
1. Press the
Menu button.
2. Select the
Settings menu and press Enter.
3. Use the up and down arrow buttons to select
Control Panel Lock
and press the
Enter button.
4. Select
Full Lock to disable all the buttons, or Partial Lock to
disable all except the
P Power button. Then press Enter.
5. Select
Yes and press Enter to confirm the setting.
6. Press the
Menu button.
Installing Security Locks
You can install two different types of security locks on the projector:
■ You can use the security slot on the base of the projector to install
a Kensington Microsaver Security System. See page 13.
■ You can use a wire lock to secure the projector to a room fixture
or heavy furniture, as shown below.
note
To cancel Control Panel
Lock, press the projector’s
Enter button for 7 seconds.
To Next Page
Loading...
Need help?
General