Epson PowerLite 410W - Controlling the Picture and Sound; Switching between Picture Sources

46 Using the Remote Control
Controlling the Picture and Sound
You can use the remote control to select your source, adjust the colors,
temporarily turn off the picture and sound, freeze the action, or zoom
in on the picture. Make sure you have set up your projector and
connected any equipment as described in Chapter 1.
Switching Between Picture Sources
If you’ve connected your projector to more than one computer and/or
video source, you can use the
Source Search button on the projector
or remote control to switch between the different sources.
After you select a source, the screen goes dark for a moment before the
image appears. The name of the selected source (such as
Computer1
or
S-Video) appears briefly on the screen.
Source Search
button