Epson PP 803 - Page 103

Troubleshooting and Diagnostics
Display
That means ...
Cause / Action
6-4
FRAMING ERROR
Protocol error serial
$
Check protocol setting of
interface
printer and host
$
Repeat data transfer
GAP ERROR
Print gap incorrect,
$
Printer not locked
green ribbon support
$
Wrong distance between
not in right position.
print head and print bar
Value of AGC not
$
Pins of the green ribbon
correct.
support broken
$
Check if print head is in its
park positon
$
AGC sensor defective
$
See also diagram
6.8.7 Gap Error
$
Error still there call service
LOCK COVER
Housing will be locked
$
Wait
LOCKING PRINTH.
Print head will be
$
Wait
locked
LOCKING RIBBON
Ribbon will be locked
$
Wait
LOCK PRINTHEAD
Print head mus be
locked
$
Press
to lock the print
head
LOCK RIBBON
Ribbon must be locked
$
Press
to lock the
ribbon
MOTOR FAN ERROR
H-motor fan error
$
Press
key again
$
Hardware error; call
service
PAPER JAM ASF
There are obstructions
$
Remove any obstacles
(only printer
PP 806
)
in the paper path
$
See also diagram
6.8.6 Paper Jam ASF
PAPER JAM MANUAL
There are obstructions
$
Remove any obstacles
in the paper path
$
Close front cover
$
See also diagram
6.8.6 Paper Jam Manual