7. Check the upper line (a) in the ink tank.
8. Align the top of the ink bottle with the lling port, and then insert it straight into the port to ll ink until it
stops automatically at the upper line.
When you insert the ink bottle into the lling port for the correct color, ink starts pouring and the ow stops
automatically when the ink reaches the upper line.
If the ink does not start owing into the tank, remove the ink bottle and reinsert it. However, do not remove
and reinsert the ink bottle when the ink has reached the upper line; otherwise ink may leak.
User's Guide
Relling Ink and Replacing Maintenance Boxes
73
To Next Page
Loading...
