Epson Stylus COLOR 3000

Note:
If you wish to make a floppy disk version of the printer software
included on your CD-ROM, click the
Driver disk creation
utility
button and follow the on-screen instructions.
3. Select your printer icon in the EPSON Printer Utility Setup
dialog box.
4. Make sure Epson Stylus COLOR 3000 is selected, and click
OK
to start the printer software installation. Follow the
on-screen messages and when the installation is complete,
click
OK
again.
Your printer software is now installed. For information on
opening and using the software, see Chapter 3, “Printing With
Windows.”
310212
L
Loire-P Ref. Guide
Rev.c
A5 size Chapter 2
02-24-97 DR, pass 0
2-14
Getting Started