4. Make sure your printer is selected and then click
Printer
,
Setup
,
Properties
, or
Options
. You may need to click a combination
of these buttons. The printer software window appears.
5. Click the
Main
tab if necessary, and make sure the Mode
option is set to
Automatic
.
Note:
❑
When Automatic is selected, the printer software makes all of
the detailed settings according to the Media Type and Ink
settings you make.
❑
If you choose
Plain Paper
,
Photo Quality Ink Jet
Paper
,
Photo Quality Glossy Paper
, or
Photo Quality
Glossy Film
as the Media Type setting while Automatic is
selected, a slide bar appears in the Mode box that lets you
choose
Quality
or
Speed
. For most print jobs, leave this set
to
Speed
. Select
Quality
when print quality is more
important than speed.
❑
The Advanced settings are described in online help and on
page 3-9.
slideco
L
Loire-P Ref. Guide
Rev.c
A5 size Chapter 3
02-24-97 DR, pass 0
3-6
Printing With Windows
To Next Page
Loading...
