Epson Stylus NX430 User Manual

Cleaning the Paper Path
If you see ink on the back of a printout, you can clean the paper path to remove any excess ink.
1. Load a few sheets of plain paper in the product.
2. Use the product control panel to make a copy, but without placing a document on the scanner glass.
3. Check the back of the ejected paper to see if it is clean.
4. Repeat as necessary until the paper comes out clean.
Parent topic: Adjusting Print Quality
Related topics
Copying
169

Epson Stylus NX430 Specifications

General

Print Technology	Inkjet
Maximum Print Resolution	5760 x 1440 dpi
Scanner Type	Flatbed
Maximum Scan Resolution	1200 x 2400 dpi
Connectivity	USB, Wi-Fi
Display	2.5-inch LCD
Input Capacity	100 sheets
Paper Sizes Supported	Letter, A4, A6, B5, 4" x 6", 5" x 7", 8" x 10"
Functions	Print, Scan, Copy
Media Types	Plain paper, Photo paper, Envelopes
Ink Cartridge	Black, Cyan, Magenta, Yellow