Epson Stylus NX430 User Manual

7. Do the following, depending on the results of the product check:
• If the page prints and the nozzle check pattern is complete, the product is operating properly. Any
operation problem you may have could be caused by your computer, cable, software, or selected
settings. Check the other solutions in this book or try uninstalling and reinstalling your printer
software.
• If the page prints but the nozzle check pattern has gaps, clean or align the print head.
• If the page does not print, the product may have a problem. Check the other solutions in this
manual. If they do not work, contact Epson.
Parent topic: Solving Problems
Related concepts
When to Uninstall Your Product Software
Print Head Cleaning
Print Head Alignment
Related references
Where to Get Help
Resetting Control Panel Defaults
If you have a problem with settings on the product control panel, you can reset them to their factory
defaults. You can choose which settings to reset or reset them all.
1. Press the home button, then press the arrow buttons to select Setup and press the OK button.
You see this screen:
176

Epson Stylus NX430 Specifications

General

Print Technology	Inkjet
Maximum Print Resolution	5760 x 1440 dpi
Scanner Type	Flatbed
Maximum Scan Resolution	1200 x 2400 dpi
Connectivity	USB, Wi-Fi
Display	2.5-inch LCD
Input Capacity	100 sheets
Paper Sizes Supported	Letter, A4, A6, B5, 4" x 6", 5" x 7", 8" x 10"
Functions	Print, Scan, Copy
Media Types	Plain paper, Photo paper, Envelopes
Ink Cartridge	Black, Cyan, Magenta, Yellow