The Control Panel 160
INTERFACE
You can select an interface to receive your print data. When you
select AUTO, the printer automatically switches between interfaces,
depending on which one is receiving data first. When you select
USB or NETWORK, only the selected interface receives your print
data. If no more print job is received, the printer returns to an idle
state after 10 seconds or more.
CODE PAGE
You can select a code page: PC437 (extended graphics) or PC850
(multilingual).
PAPER MARGIN
You can select margins for roll paper: DEFAULT, T/B15mm,
T/B25mm, 15 mm, or 3mm.
Margin settings Top Bottom Left/Right
DEFAULT See the list below. 3 mm
T/B 15 mm 15 mm 15 mm 3 mm
T/B 25 mm 25 mm 25 mm 3 mm
15 mm 15 mm 15 mm 15 mm
3mm 3 mm 3 mm 3 mm
To Next Page
Loading...
