Epson Stylus Pro 4880 - Page 181

The Control Panel 181
4. Press the Paper Feed or Paper Feed button to select
STD or paper thickness value between 0.1 mm and 1.6 mm.
When the paper thickness value is 0.2 mm or 1.2 mm, select
STD. Otherwise, select the actual paper thickness value.
5. Press the Menu
button to register your value.
6. Press the Paper Source button , then press the Paper Feed
button.
7. When ALIGMENT appears on the lower row on the LCD panel,
press the Menu
button.
8. Press the Menu
button to select MANUAL, and press the
Paper Feed or Paper Feed button to select BI-D
2-COLOR.
9. Press the Menu
button, and the printer starts printing.
Head alignment pattern examples:
EPSON Stylus Pro 4880/4880C:
VLm
123456789
Lc
123456789