The Control Panel 182
EPSON Stylus Pro 4450:
10. After printing is finished, the pattern number and current set
number are displayed. Select the set that has the smallest gaps,
and then press the Paper Feed or Paper Feed button
to display the number for that set.
11. Press the Menu
button to register the set number. The next
pattern number appears. Then repeat step 10.
If you are not satisfied with the result of this alignment, press
the Paper Source button to return to the previous level,
and then select BI-D ALL.
If you are not satisfied with the result of BI-D ALL alignment,
try UNI-D.
12. After you set the patterns, press the Pause
button to return
to the READY status.
M
123456789
C
123456789
To Next Page
Loading...
