Epson Stylus Pro 9500 - Page 17

EPSON Stylus Pro 9500 Revision A
Product Description SPECIFICATIONS 17
CONTROLLER SPECIFICATIONS
CPU: 32 bit RISC-CPU (SH7043) 33Mhz
ROM: [Program]
CPU Internal = 128KB ROM
External = 1MB (Flash ROM/4Mbit x 2)
[Font] not-installed
RAM: 18MB (fixed)
(16MB: SIMM/2MB: IC18,19)
Interface: [Standard]
IEEE1284 Bidirectional Parallel Interface
Macintosh Serial Interface
Type-B Card Slot (x1) for optional interface
PRINTER DIMENSIONS & WEIGHT
Dimensions: 1688 x 699 x 1259mm (WxDxH)
(66.46 x 27.52 x 49.57 inches)
Weight: 96Kg (211.91 lb.s)
Printer alone = 74Kg (163.32 lb.s)
Stand = 22Kg (48.59 lb.s)
Figure 1-3. Printer Dimensions
CHECK
PO INT
The RAM installed in the form of a SIMM module is a
part of system memory and cannot be replaced (to
install a larger capacity SIMM) or removed.
1259mm
(49.57”)
1688mm
(66.46”)
699mm
(27.52”)