EPSON Stylus Pro 9500 Revision A
Product Description SPECIFICATIONS 9
1.2 SPECIFICATIONS
PRINT SPECIFICATIONS
Print method: On-demand MACH (Multi-layer Actuator Head) ink
jet E-MACH type
Nozzle configuration: Black: 64 nozzles
Color: 320 nozzles/64 nozzles for each color (Yellow,
Magenta, Cyan, Light Magenta, and Light Cyan)
Print direction: Bi-directional with logic seeking
(high-speed return and skip only)
Print speed: See the following table:
n <Character mode>
Character Quality: High quality
Character Pitch: 10 cpi
Printable Area: 437 columns
Print Speed: 240 cps
n <Graphic mode>
See the table below.
Table 1-2. Print Speed by Print Mode
Control code: ESC/P Raster (commands are not open to public)
Character Specifications:
n Character Code
PC 850 (Multilingual)
PC437 (US, Standard Europe)
n Type Faces
Bitmap LQ font: EPSON Courier IO CPI
PAPER-FEED SPECIFICATIONS
Feeding method: Friction feed
Line spacing: 1/6 or 1/720” programmable
Paper loading: Roll paper (two 2-inch rolls can be loaded at the
same time)
Single sheets loaded one at a time
Paper volume: 2” core roll paper = diameter of paper wound on roll
of less than 103mm (4.05”)
3” core roll paper = diameter of paper wound on roll
of less than 150mm (5.9”)
Single sheets = one sheet at a time
Feed speed: 200 ± 10 ms (when feeding at 1/6”)
2.5”/second (when continuously feeding)
Table 1-2.
Horizontal
Resolution
Printable Area
Printable Dot
Count
Print Speed
360 1112mm 15762 241 IPS/FOL
720 1112mm 31524 33.31 IPS/FOL
33.31 IPS/4pass
1440 1112mm 63048 24IPS/FOL
33.31 IPS/4pass
To Next Page
Loading...
