Epson Stylus Pro 9500 - 5.2.6 Cleaning menu

EPSON Stylus Pro 9500 Revision A
Adjustment Adjustment Steps 198
5.2.6 Cleaning menu
Using this menu you can select a cleaning mode and initiate that cleaning
operation. Also you can select whether or not the printer performs the initial-
cleaning cycle as well as forcefully start the initial-cleaning cycle.
o Std. KK0 (CL1)
Normal cleaning cycle Volume of ink cleared = low
o Std. KK1 (CL1’)
Strong cleaning cycle Volume of ink cleared = medium
rubbing = off
o Std. KK2 (CL2)
Strong cleaning cycle Volume of ink cleared = high
rubbing = on
o Init. Fill Perform Initial charge sequence
PRINT MENU
The Print menu performs the same test-printing functions as the "Test Print"
option on the Adjustment menu. For details, see “Test Pattern Print” on
page 186.
5.2.7 Parameter menu
Using this menu you can reset or change the parameters for the printer
mechanism controls. However, the parameters on this menu can also be
modified from the Adjust menu. When servicing the printer, you do not need to
separately update or reset the parameters from this menu.
"INITIALIZE" ITEMS
The items you can reset (re-initialize) using this menu are described below.
o Capping Position (See page xx)
o PF (See page xx)
o Serial No. (See page xx)
o Maintenance Record (See page xx)
[Pause] returns you
to previous menu
[SelecType]
[Item]
[Enter]
Start the
cleaning cycle
Cleaning: Std. KK0
Cleaning: Std. KK1
Cleaning: Std. KK2
Cleaning: Init. Fill
[Pause] to return to previous menu
[SelecType]
[Enter]
[Item]
Other
menus
[Pause]
Parameter: Init.
Parameter: Update