Epson Stylus Pro 9500 - 4.2 Disassembly Flow

EPSON Stylus Pro 9500 Revision A
Disassembly & Assembly Disassembly Flow 85
4.2 Disassembly Flow
Refer to the following flowchart when determining the disassembly flow.
Figure 4-1. Disassembly Process Flowchart
CPM2x4 silver (+) Crosshead Pan,2x4
CBM3x6 silver (+) Bind screw,3x6
Hex screw silver six-sided hex screw, 2.5mm
Table 4-2. Screws
Type Color Description
4.2.1 Remove Housing
4.2.2 Remove Circuit Board
Maintenance Cover
H Top Cover
L/R Side Covers
Front Cover
Roll Cover
Lower Paper Guide
Upper Paper Guide
Power Board
C277MAIN Board
4.2.3 Disassemble Printer Mechanism
Replace Waste Ink Pads
Replace Printheads
CR Motor / Pulley Assembly
PF Motor / Pulley Assembly
Maintenance Assembly
Sensors
4.2.4 Disassemble Ink System Mechanism