U “Positioning Media of Different Widths” on
page 70
Note:
If the label with black squares is not in place, affix
the label as described in the Setup Guide.
U Setup Guide
E
Align the media and the roll holders.
Raise or lower the lifter until the media roll core is
level with the roll holders.
F
Fully insert the left roll holder. Next, tighten the
roll holder screw to fix the roll holder in place.
G
Fully insert the right roll holder. Next, tighten the
roll holder screw to fix the roll holder in place.
H
Remove the lifter.
EPSON SC-S70600 series/SC-S50600 series/SC-S30600 series User's Guide
Basic Operations
39
To Next Page
Loading...
