Printable Side In
If the label does not have the loading position,
mark it on the label as instructed in the Setup
Guide supplied with the optional heavy roll
media system.
U Heavy Roll Media System Setup Guide
Note:
Be sure the option selected for Roll Type in the
Customize Settings menu matches how the media
is rolled. Roll Type defaults to Printable Side Out.
Be sure to select Printable Side In after loading
media rolled printable side in.
For more information see U “Roll Type” on
page 65
D
Align the media and the roll holders.
Raise or lower the lifter until the media roll core is
level with the roll holders.
E
Fully insert the left roll holder. Next, tighten the
roll holder screw to fix the roll holder in place.
F
Fully insert the right roll holder. Next, tighten the
roll holder screw to fix the roll holder in place.
G
Remove the lifter.
EPSON SC-S70600 series/SC-S50600 series/SC-S30600 series User's Guide
Basic Operations
49
To Next Page
Loading...
