c
Important:
Stop when part A is no longer visible. The
take-up reel unit may not function as
expected if the holder is inserted too far.
F
Tighten the roll core holder fixing screw to fix the
roll core holder in place.
See the following for further instructions.
For information on counterclockwise take up, see the
following section.
For information on clockwise take up, see U
“Clockwise Take Up” on page 58.
Counterclockwise Take Up
A
Attach the media to the take up roll core.
Tape the media to the take up roll core in the
center and then at the left and right edges.
B
Press the d button in the control panel to feed
enough media for a single wrap around the roll
core.
C
Flip the Auto switch to Off and press the Manual
switch to
to wrap the media once around
the roll core.
D
Flip the Auto switch to .
EPSON SC-S70600 series/SC-S50600 series/SC-S30600 series User's Guide
Basic Operations
57
To Next Page
Loading...
