Epson SureColor SC-T7700D - Shared Folder Settings

Messages Cause
SMTP server authentication failed.
Change Authentication Method to
SMTP-AUTH.
This message appears when an authentication method mismatch occurs between
a server and a client. The server supports SMTP AUTH.
SMTP server authentication failed.
Change Authentication Method to
POP before SMTP.
This message appears when an authentication method mismatch occurs between
a server and a client. The server does not support SMTP AUTH.
Sender's Email Address is incorrect.
Change to the email address for your
email service.
This message appears when the specied sender’s Email address is wrong.
Cannot access the printer until
processing is complete.
This message appears when the printer is busy.
Related Information
& “Checking a Mail Server Connection” on page 31
Shared Folder Settings
Make the shared folder settings for printing les from a shared folder.
Preparing the Shared Folder
Setting the Shared Folder from the Control Panel
1.
Select Menu on the printer's control panel.
2. Select General Settings > Network Settings > Advanced > Shared Folder.
3. Enter a value for each item.
❏ Folder Name
Enter the network path for the shared folder within 255 characters.
❏ User Name
Enter the user name that you use to log into the computer.
❏ Password
Enter the password that you use to log into the computer.
4.
Select Proceed.
5. Close the
conrmation
screen.
Setting the Shared Folder Using Web Cong
1. Access Web Cong and select the Print tab > Basic.
Administrator's Guide
Function Settings
33