Epson TM-C3400 Technical Reference Guide

110
Media Loading Settings
Sets paper feed movement to the print starting position when turning the printer power on or
the roll paper cover is closed.
The following is the movements to feed the paper to the print starting position when turning the
printer power on or the roll paper cover is closed. (Default setting is [Media Loading Method
(with Cutting)]. The user does not need to set
when using with default setting.)
1
Turn the printer on.
2
Display the printer driver window.
(See How to Use the Printer Driver on page 154 for how to display the driver window.)
3
Select [Maintenance And Utilities] tab, and click [Media Loading Set-
tings].
Setting Specification Power ON
Roll
paper
cover
close
Media Load-
ing Method
(with Cutting)
When either black mark detection or detection of gaps
between labels is set for media position detection, the
top of black mark or the top of label is detected by the
black mark detector or the label detector at the
power-on, and the paper is fed to the print starting
position.
When no position is detected, the specified amount of
paper is fed. After paper feeding, the printer enters the
stand-by mode with performing autocutting.
√ √
Media
Loading
Method
(without
Cutting)
When either black mark detection or detection of gaps
between labels is set for media position detection, the
top of black mark or the top of label is detected by the
black mark detector or the label detector at the
power-on, and the paper is fed to the print starting
position.
When no position is detected, the specified amount of
paper is fed. After paper feeding, the printer enters the
stand-by mode without performing autocutting.
√ √
No Media
Loading
Method
The printer does not feed the paper to the print starting
position at power-on.
√
—

Epson TM-C3400 Specifications

General

Brand	Epson
Model	TM-C3400
Category	Printer
Language	English