Chapter 1 Product Overview
21
1
Status/Error Indications
The printer status is displayed with combination of lighting and flashing of LEDs.
When an error occurs, you can find out the cause and the remedy from the LED indication for
the error.
LED
Status Remedy
Power Error Ink Paper
———
Power on
—
———
Powering off
Charging ink
Closing roll paper cover
Saving or printing data
—
AID temperature error
The ambient temperature
may be too low or too high.
Make sure that the ambient
temperature between 10°C
and 35°C, turn off the printer
and then turn it back on. (See
"Environmental Conditions" on
page 55.)
Maintenance requirement The printer needs repair.
Fatal error
1. Turn the power off.
2. Open the roll paper cover
and remove the jammed
paper if any. (See "Removing
Jammed Paper" on page
151.)
3. Turn the power on.
If the same error persists, the
printer needs repair.
Cutter error
—
/ : Li
To Next Page
Loading...
Need help?
General