Epson TM-C3400 - Print Area and Cutting Position

44
Print Area and Cutting Position
Receipt / Roll paper
Top margin: 2.0 mm (typical value)
Left and right margin: 2.0 mm (typical value)
Bottom margin: 2.0 mm (typical value)
When the roll paper option is set to “Banner Mode,” a top margin is set only on the first
page of the print job, and not on the rest. A bottom margin is set on the last page of the print
job.
Paper width
2.0 mm
11.0 mm or more
15.0 mm or more
(When auto-cutting)
2.0 mm
2.0 mm
2.0 mm
Auto-cut position
Auto-cut position
Paper feeding direction
Print area
Print area width
Paper
Center of paper width