22
——
Paper size error
Set specified papers. (See
"Loading/Replacing the
Paper" on page 78.)
When the specified paper is
not available, cancel the print
job from the spooler. If no print
job is in the spooler, turn off
and on the printer to recover
from the error.
Paper path error
Set DIP switch 3 setting to
paper feeding method in the
printer driver. (See "Setting the
DIP Switches" on page 76)
Paper jam error
Remove the jammed paper.
(See "Removing Jammed
Paper" on page 151.)
——
Paper type error
Set specified papers. (See
"Loading/Replacing the
Paper" on page 78.)
—— —
Ink end
Waste ink cartridge is full
Replace the ink cartridge with
a new one. (See "Replacing
the Ink Cartridge" on page
143.)
Ink cartridge is not loaded
Ink cartridge is not loaded
correctly
Load the ink cartridge
correctly. (See "Replacing the
Ink Cartridge" on page 143.)
Ink cartridge cover is open Close the ink cartridge cover.
—— —
Ink cartridge is low
Waste ink cartridge is
nearly full
The time to replace the ink
cartridge is close. Prepare a
new ink cartridge.
———
Paper empty
Paper out error
Set the papers. (See
"Replacing the Paper" on
page 145.)
———
Roll paper cover is open Close the roll paper cover.
———
Paper removal error
Remove the fanfold paper
remaining. (See "For Fanfold
Paper" on page 152)
LED
Status Remedy
Power Error Ink Paper
/ : Li
To Next Page
Loading...
Need help?
General