Chapter 4 Handling
171
4
Printing the barcode in cyan only
When the printed barcode is difficult to read, make settings to print it in cyan only.
1
Select [Advanced] in [Print Settings]-[Color Corrections] in [General] tab.
2
Click the [Advanced] button.
3
“Advanced” screen is displayed.
4
Select [Disable Color Correction].
5
Check [Print barcodes and 2D symbols in cyan only].
6
Click the Close] button.
The barcode may not be read depending on your environment. Check it before using.
(1)
(2)
(3)
(4)
(5)
To Next Page
Loading...
