Chapter 5 Maintenance of the TM-C3400
225
5
Distribution :
➀ Prepare the client computers, the printers, and the administrator’s computer for the
network connection (possible to use also as a client computer).
➁ Connect Printer-1 and Printer-2 to the network.
➂ Set IP Address-1 to Printer-1, and IP Address-2 to Printer-2, using the EpsonNet Config
on the administrator’s computer.
➃ Copy the Install Package-1 on Client Computer-1, and double click its icon. The printer
driver for Printer-1 is automatically installed and set.
➄ Copy the Install Package-2 on Client Computer-2, and double click its icon. The printer
driver for Printer-2 is automatically installed and set.
➅ Make the settings with the Printer Setting on the administrator’s computer using the
printer setting file A. (Setting can be made for Printer-1 and Printer-2 at the same time.)
For the Ethernet interface model, the install package is necessary for each printer, since
the IP address is set to each printer.
To Next Page
Loading...
Need help?
General