Epson TM-C3400 Technical Reference Guide

Chapter 5 Maintenance of the TM-C3400
233
5
Ethernet interface model
Configure the IP address and other network settings of the existing printer and the settings of the
existing printer in the new printer. There is no need to configure the printer driver on the client
computer.
❏ Preparation
•The network setting information of the existing pr
inter (IP address and so on)
Print the status sheet with the existing printer.
(See "Status Sheet Printing (Ethernet interface model only)" on page 190.)
•The printer setting file of the existing printer
•Confirm the DIP switch setting for the existing printer.
❏ Replacing procedure
➀ Set the new printer’s DIP switch settings to the same as that of the existing printer.
➁ Connect the new printer to the network, and turn it on.
➂ Make the network setting for the new printer according to the printed status sheet using
EpsonNet Config.
➃ Make the setting to the new printer using the printer setting file with the Printer Setting.

Epson TM-C3400 Specifications

General

Brand	Epson
Model	TM-C3400
Category	Printer
Language	English