Chapter 1 Product Overview
35
1
Die-cut Label
Paper type Plain Media Label
Form Roll paper
Backing paper width 30 to 112 mm
Label width 25.4 to 108 mm
Label length 25.4 to 1117.6 mm
When it is less than 15 {0.59”} to 25.4 {1”} mm, use the label of
“When removing right and left fringes only” in the illustration.
Gap between labels 3 to 6 mm
Edge cutoff on left/right side 2 ± 0.5 mm
Label edge R 2 mm or less
Paper thickness 0.128 mm
Roll paper core Outside diameter: 44.1 mm
External diameter Maximum 101.6 mm
Winding direction Printing face must be facing outside.
Do not use the paper with a hole or cutout.
Label width
Edge cutoff Edge cutoff
Backing paper width
Backing paper width
Edge cutoff (edge) Edge cutoff (edge)
Label length
Gap between
labels
Label length
Edge R
Edge R
Label
Label width
Gap between
labels
When removing all the fringes
To Next Page
Loading...
Need help?
General