52
Communication conditions using a USB interface
Printer Class
Vendor Class (initial setting)
Communication conditions using a Bluetooth interface
Passkey (initial setting: 0000)
Device name (initial setting: TM-P20_xxxxxx)
Security (initial setting: Low)
Auto Re-Connect with iOS device (initial setting: Enabled)
Acceptable Characters
The device name is initially set to TM-P20_xxxxxx.
(xxxxxx refers to the last 6 digits of the serial number labeled on the back of your printer.)
Item Number of characters Acceptable Characters
Passkey 4 to 16 30H to 39H, 41H to 46H
(Indicates the number from “0” to “9” and “A” to
“F” in hexadecimal)
Device Name 1 to 31 20H, 21H, 23H to 7EH
(Character code between 20H and 7EH and except
for the double quotation mark ("))
To Next Page
Loading...
