Epson TM-P20 - Printable Area; Printing and Cutting Positions

88
Printable Area
Printing and Cutting Positions
Printing is automatically performed in one to six-part energization depending on the printing condi-
tions. During printing with two to six-part energization, a misalignment (horizontal ruled line shift) of
1/12 to 1/4 dot might occur in the paper feeding direction due to segmented printing.
Dot 1
57.5 ± 0.5 mm
0.125 mm
4.755 mm
48.0 mm (Dot 1 to 384)
4.75 mm
Dot 384
Approx. 7.9 mm
{0.31"}
Manual-cutter position
Center of the print dotline
Paper feed direction