Epson TM-P20 Technical Reference Guide

63
Chapter 3 Advanced Usage
3
Dynamic Status Sheet Print Mode
Wi-Fi Model
In the dynamic status sheet print mode, the printer prints the dynamic status sheet indicating the wireless LAN
settings.
Follow the steps below.
1
Make sure the printer is turned on.
2
Open the roll paper cover.
3
Install the roll paper.
4
With the roll paper cover open, keep pressing the Feed button until the buzzer
sounds.
5
Close the roll paper cover.
The printer starts printing the dynamic status sheet.
6
Confirm that “Link Status” value is “Connect” and that “TCP/IP Status” is properly set.
After printing, the printer returns to the normal mode.
Do not run this mode while communicating with the wireless LAN interface. Otherwise, printing
might not be performed normally.
 Dynamic status sheet cannot be printed in SimpleAP mode (factory default status).
 Dynamic status sheet cannot be printed when USB cable is connected.
 QR code is printed when the firmware version is 1.01 ESC/POS or later.

Epson TM-P20 Specifications

General

Type	POS printer
Color	No
Print technology	Thermal
Maximum resolution	203 x 203 DPI
Rechargeable	Yes
Electromagnetic compatibility	FCC class A, CE
Mean cycles between failures (MCBF)	16000000
Power source type	AC, Battery
Battery life (max)	16 h
Product color	Black
Safety	EN
Country of origin	China
Sound pressure level (printing)	57 dB
Mean time between failures (MTBF)	120000 h
Media thickness	0.05 - 0.08 mm
Maximum roll diameter	40.4 mm
Supported paper width	58 mm
Wi-Fi standards	802.11a, 802.11b, 802.11g
USB connector	Mini-USB Type-B
Standard interfaces	NFC, USB 2.0
Connectivity technology	Wired & Wireless
Package depth	240 mm
Package width	195 mm
Package height	145 mm
Package weight	1482 g
Cables included	AC, USB
Quantity per pack	1 pc(s)
Operating relative humidity (H-H)	10 - 90 %
Pallet width	800 mm
Pallet height	1020 mm
Pallet length	1200 mm
Pallet width (UK)	1000 mm
Quantity per pallet	216 pc(s)
Quantity per pallet (UK)	288 pc(s)
Quantity per pallet layer	36 pc(s)
Harmonized System (HS) code	84433210
Quantity per pallet layer (UK)	48 pc(s)

Weight and Dimensions

Depth	120 mm
Width	79 mm
Height	44 mm