EasyManuals Logo
Home>Epson>Printer>TM-P20

Epson TM-P20 Technical Reference Guide

Epson TM-P20
100 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #66 background imageLoading...
Page #66 background image
66
Settings
Select from the menu list on the left to check or configure the settings.
Information menu
You can check the settings as shown in the table below.
Enable the time server when using a certificate. Otherwise, the printer's Stored Date/Time may not be
set correctly and the wireless LAN may be unavailable. If this happens, enable the time server, or ini-
tialize the Stored Date/Time from one of the following:
EpsonNet Config
EpsonNet Config (Web Version)
Wireless module setup mode
You can check the printer's Stored Date/Time from the dynamic status sheet.
Menu Settings
Basic Information
Administrator Name, Location, interface Card Model Name, MAC Address, Hard-
ware Version, Software Version, Model Name,
Communication Standard, Network Mode, SSID, Channel, Transmission Rate,
Access Point MAC Address, Signal Condition,
Printer Status
TCP/IP
IPv4 Address
IP Address Settings (Acquiring the IP Address, IP Address, Subnet Mask, Default
Gateway)
Set Using Automatic Private IP Addressing (APIPA)
DNS/DDNS
DNS Server Addresses (IPv4) Settings (Acquire DNS Server Address Automati-
cally, DNS Server Addresses)
Domain Name Setting (Acquire Domain Name Automatically, Fully Qualified
Domain Name, Register the Network Interface’s Address to DNS Server)
SNMP
Community (Read Only, Wellknown Community Name)
IP Trap (Trap1/2, Address, Community)
Bonjour
Bonjour (Disable/Enable)
Bonjour Name, Bonjour Printer Name, Location
Time Setting
Use Time Server
Time Server Address, Update Interval, Time Server Status
Timeout
Print (LPR, RAW (Port9100))
ePOS-Print
Version, ePOS-Print (Disable/Enable), Device ID

Table of Contents

Other manuals for Epson TM-P20

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson TM-P20 and is the answer not in the manual?

Epson TM-P20 Specifications

General IconGeneral
TypePOS printer
ColorNo
Print technologyThermal
Maximum resolution203 x 203 DPI
RechargeableYes
Electromagnetic compatibilityFCC class A, CE
Mean cycles between failures (MCBF)16000000
Power source typeAC, Battery
Battery life (max)16 h
Product colorBlack
SafetyEN
Country of originChina
Sound pressure level (printing)57 dB
Mean time between failures (MTBF)120000 h
Media thickness0.05 - 0.08 mm
Maximum roll diameter40.4 mm
Supported paper width58 mm
Wi-Fi standards802.11a, 802.11b, 802.11g
USB connectorMini-USB Type-B
Standard interfacesNFC, USB 2.0
Connectivity technologyWired & Wireless
Package depth240 mm
Package width195 mm
Package height145 mm
Package weight1482 g
Cables includedAC, USB
Quantity per pack1 pc(s)
Operating relative humidity (H-H)10 - 90 %
Pallet width800 mm
Pallet height1020 mm
Pallet length1200 mm
Pallet width (UK)1000 mm
Quantity per pallet216 pc(s)
Quantity per pallet (UK)288 pc(s)
Quantity per pallet layer36 pc(s)
Harmonized System (HS) code84433210
Quantity per pallet layer (UK)48 pc(s)
Weight and Dimensions IconWeight and Dimensions
Depth120 mm
Width79 mm
Height44 mm

Related product manuals