86
Paper Specifications
Specified original paper type
Type Thermal paper:
Receipt paper (without black mark)
Receipt paper (with black mark)
Form Roll paper
Size Width 57.5 ± 0.5 mm {2.26 ± 0.02"}
Outside diameter 40.4 mm {1.59"} maximum
Roll width when taken up 57.5 ± 0.5 mm {2.26 ± 0.02"}
Roll paper core Outside diameter: 18.0 mm {0.71"} or more
Width: Same as the paper width or less than the paper width by 1 mm {0.04"}
Paper type no. Manufacturer
P30023, P31023, P35024 Kanzaki Specialty Papers
KT55F20, KT48F20 Koehler
AF50KS-E Jujo Thermaloy
F5041(48), F5041(55) Mitsubishi HiTec
For the winding direction of a thermal roll, the chromogenic side must face outside.
Paper must not be pasted to the roll paper core.
For the best print quality for each paper type, it is recommended to set the print density. The print
density can be set with the customized value. To set customized value, See
"Software Settings" on
page 47
.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
