84
Character Specifications
Number of characters
Character structure
The maximum printing speed listed above may not be achieved depending on the type of inter-
face, the data transmission speed, and the combination of control commands. Especially, the print-
ing speed may change automatically depending on the communication environment if using a
wireless interface.
If the data transmission speed is slower than the maximum printing speed, or depending on the
battery depletion and deterioration conditions and environment temperature, the printing speed
may fluctuate, and the print result may become shaded and/or dot displacement in paper feeding
may occur.
If the data transmission speed is slow, intermittent printing may occur and white lines may be
formed when printing graphics. To avoid this, keep the print speed constant by setting it lower. The
print speed can be set with the customized value. To set the customized value, see
"Software Set-
tings" on page 47
.
ANK models Alphanumeric characters: 95
Extended graphics: 128 × 43 pages (including user-defined page)
International characters: 18 sets
Simplified Chinese models Alphanumeric characters: 95
Extended graphics: 128 × 43 pages (including user-defined page)
International characters: 18 sets
Kanji font GB18030-2000: 28,553
Traditional Chinese models Alphanumeric characters: 95
Extended graphics: 128 × 43 pages (including user-defined page)
International characters: 18 sets
Kanji font Big5: 13,535
South Asia models Alphanumeric characters: 95
Extended graphics: 128 × 42 pages (user-defined page is not supported)
International characters: 29 sets
Common to all models Font A 12 × 24
Font B 9 × 24
Font C 9 × 17
Font D 10 × 24
Font E 8 × 16
Chinese model Kanji Font A 24 × 24
To Next Page
Loading...
Need help?
General
Weight and Dimensions
