Epson TM-T81

Confidential
EPSON
TITLE
SHEET
REVISION
NO
SHEETNEXT
101 102
A
TM-T81
Specification
(STANDARD)
GS L nL nH
[Name] Set left margin
[Format] ASCII GS L n
L nH
Hex 1D 4C n
L nH
Decimal 29 76 n
L nH
[Range] 0 ≤ (n
L + nH × 256) ≤ 65535 (0 ≤ nL ≤ 255 , 0 ≤ nH ≤ 255)
[Default] (n
L + nH × 256) = 0 (nL = 0 , nH = 0)
[Description] • In standard mode, sets the left margin to [(n
L + nH × 256) × (horizontal motion unit)].
GS P x y
[Name] Set horizontal and vertical motion units
[Format] ASCII GS P x y
Hex 1D 50 x y
Decimal 29 80 x y
[Range] 0 ≤ x ≤ 255
0 ≤ y ≤ 255
[Default] x = 180 , y = 360
[Description] • Sets the horizontal and vertical motion units to approximately 25.4/x mm {1/x"} and
approximately 25.4/y mm {1/y"}, respectively.
• When x = 0, the default value of the horizontal motion unit is used.
• When y = 0, the default value of the vertical motion unit is used.
<A> GS V m
<B> GS V m n
[Name] Select cut mode and cut paper
[Format] <A> ASCII GS V m
Hex 1D 56 m
Decimal 29 86 m
<B> ASCII GS V m n
Hex 1D 56 m n
Decimal 29 86 m n
[Range] <A> m = 0, 1, 48, 49
<B> m = 65, 66 , 0 ≤ n ≤ 255
[Description] • Executes paper cutting specified by m.
m Function
<A> 0, 48
1, 49
Cuts paper.
<B> 65, 66
Feeds paper to (cutting position + [n × (vertical motion unit)])
and cuts the paper.
[Note] • This printer executes a partial cut (one point left uncut).