Epson TM-T81 Technical & Specifications Manual

Confidential
EPSON
TITLE
SHEET
REVISION
NO
SHEETNEXT
104 105
A
TM-T81
Specification
(STANDARD)
• Second byte (printer information)
Bit Off/On Hex Decimal Status
0 - 2 -- -- -- Reserved.
3 Off 00 0 No autocutter error.
On 08 8 Autocutter error occurred.
4 Off 00 0 Fixed.
5 Off 00 0 No unrecoverable error.
On 20 32 Unrecoverable error occurred.
6 Off 00 0 No automatically recoverable error.
On 40 64 Automatically recoverable error occurred.
7 Off 00 0 Fixed.
• Third byte (paper sensor information)
Bit Off/On Hex Decimal Status
0, 1 Off 00 0 Roll paper near-end sensor: paper adequate.
On 03 3 Roll paper near-end sensor: paper near end.
2, 3 Off 00 0 Roll paper end sensor: paper present.
On 0C 12 Roll paper end sensor: paper not present.
4 Off 00 0 Fixed.
5, 6 -- -- -- Reserved.
7 Off 00 0 Fixed.
Bits 2 and 3: While the cover is opening, this shows the state when the cover was still
closed.
• Fourth byte (paper sensor information)
Bit Off/On Hex Decimal Status
0 - 3 -- -- -- Reserved.
4 Off 00 0 Fixed.
5, 6 -- -- -- Reserved.
7 Off 00 0 Fixed.
[Reference] Appendix J
GS b n
[Name] Turn smoothing mode on/off
[Format] ASCII GS b n
Hex 1D 62 n
Decimal 29 98 n
[Range] 0 ≤ n ≤ 255
[Default] n = 0
[Description] • Turns smoothing mode on or off.
• When the LSB of n is 0, smoothing mode is turned off.
• When the LSB of n is 1, smoothing mode is turned on.

Epson TM-T81 Specifications

General

Print Method	Thermal line printing
Autocutter	Yes
Interface	USB, Ethernet
Dimensions	140 mm (W) x 199 mm (D) x 146 mm (H)
Power Supply	AC 100 V - 240 V, 50 Hz - 60 Hz
Paper Width	79.5 ±0.5 mm