Epson TM-T81

Confidential
EPSON
TITLE
SHEET
REVISION
NO
SHEETNEXT
6 5
TM-T81
Specification
(STANDARD)
A
1.6 Printable Area
1) Paper roll
The printable area of a paper with width of 79.5 ± 0.5 mm {3.13 ± 0.02"} is 72.2 ± 0.2 mm {2.84 ±
0.008"} (512 dots) and the space on the right and left sides are approximately
3.7 ±2 mm {0.15 ± 0.079"}.
a
b
c
de
Figure 1.6.1 Paper Roll Printable Area
1.7 Printing and Cutting Positions
Paper feed direction
[ Units: mm (All the numeric values are typical.) ]
Center of the print dotline
Auto-cutter blade position
Manual-cutter position
14.8
26.3
Figure 1.7.1 Printing and Cutting Positions
NOTE: Numeric values used here are typical values; the values may vary slightly as a result of
paper slack or variations in the paper. Take this into account when setting the cutting
position of the auto-cutter.
1.8 Internal Buffer
1) Receive buffer: selectable as 45 bytes or 4 KB using the DIP switch.
2) User-defined buffer (both for user-defined characters and user-defined bit images): 12 KB
3) Macro buffer: 2 KB
4) NV (Non-volatile) bit image buffer: 256 KB
5) NV user memory: 1 KB
a = 79.5 ± 0.5 mm {3.13 ± 0.02"}
b = 0.141 ± 0.05 mm {0.056 ± 0.002"}
c = 72.2 ± 0.2 mm {2.84 ± 0.008"}
d = 3.7 ± 0.2 mm {0.15 ± 0.079"}
e = 3.7 ± 0.2 mm {0.15 ± 0.079"}
[All the numeric values are typical.]
Approx. 27.5
Approx. 10.5